Exposure Control; Back Light Button [Back Light]; Power Switch - JVC GR-DVM50 Instructions Manual

38
EN
A M
Operation Switch
BACK LIGHT Button
Lock Button
Power lamp

Power Switch

Display
FOCUS AUTO
4 EXPOSURE MANUAL
W. BALANCE AUTO
FADER OFF
/ WIPE
P. AE OFF
/ EFFECT
TO MODE MENU 0
END
EXP.
6
EXP.
0
EXP.
6
Exposure control indicator
RECORDING
MENU/SET Dial
Recording Menu
To darken the image
To brighten the image
Advanced Features (cont.)

Exposure Control

This feature automatically adjusts the iris for the best
available picture quality, but you can override and make
the adjustment manually.
1
SELECT OPERATION MODE
Set the Operation Switch to "
Power Switch to "
down the Lock Button. Pull out the viewfinder fully or
open the LCD monitor fully.
2
ACCESS RECORDING MENU
Press MENU/SET. The Recording Menu appears.
3
ACCESS "EXPOSURE"
Rotate MENU/SET to move the highlight bar to
"EXPOSURE", then press it.
4
ACCESS EXPOSURE CONTROL
Rotate MENU/SET to display "MANUAL", then press
it. The Recording Menu disappears. "EXP." and the
highlight bar on the exposure control indicator are
displayed.
5
ADJUST EXPOSURE
To brighten the image . . .
.... rotate MENU/SET upward. The exposure control
indicator increases (maximum +6).
Go to step 6.
To darken the image . . .
.... rotate MENU/SET downward. The exposure
control indicator decreases (maximum –6).
Go to step 6.
6
END ADJUSTMENT OF EXPOSURE
Press MENU/SET. Exposure adjustment is complete. The
indication "EXP." changes to "MANUAL" and the
highlight bar on the exposure control indicator goes out.
•If you want to reset the exposure, repeat step 2.
To Return To Automatic Exposure Control . . .
.... rotate MENU/SET to display "AUTO" then press it in
step 4. The exposure control indicator disappears. Or
set the Operation Switch to "
NOTES:
After the Power Switch is set to "OFF", Exposure Control is reset
to "AUTO".
Manual exposure adjustment is recommended in the following
situations:
• When shooting using reverse lighting or when the background
is too bright.
• When shooting on a reflective natural background such as at
the beach or when skiing.
• When the background is overly dark or the subject light.
To Brighten The Subject Quickly . . .
.... press BACK LIGHT.
brightened. If pressed again,
brightness returns to the previous level. The value shown
by the exposure control indicator plus 2 is the back light
compensation level. The maximum compensation level
is +6. Back light compensation is also available when the
Operation Switch is set to "
". Then, set the
" or "5S" while pressing
".
is displayed and the subject is
disappears and the
".