Download
Share
Print this page
Max NF665/15 Operating And Maintenance Manual
  1. Manuals
  2. Brands
  3. Max Manuals
  4. Nail Gun
  5. NF665/15
  6. Operating and maintenance manual

Max NF665/15 Operating And Maintenance Manual

15 ga. finish nailer
Hide thumbs

Advertisement

Quick Links

Download this manual
NF665/15
15 GA. FINISH NAILER
15. CLOUEUR DE FINITION A ANGLE DE 15 Ga
CLAVADORA DE ACABADO ANGULAR DE CALIBRE 15
OPERATING AND MAINTENANCE MANUAL
MANUEL D'UTILISATION ET D'ENTRETIEN
MANUAL DE OPERACIONES Y MANTENIMIENTO
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN-
STRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
WARNING
AVANT D'UTILISER CET OUTIL, LIRE CE MANUEL ET LES CONSIGNES DE SÉCURITÉ AFIN DE
GARANTIR UN FONCTIONNEMENT SÛR.
CONSERVER CE MANUEL EN LIEU SÛR AVEC L'OUTIL AFIN DE POUVOIR LE CONSULTER UL-
TÉRIEUREMENT.
AVERTISSEMENT
ANTES DE UTILIZAR ESTA HERRAMIENTA, LEA DETENIDAMENTE ESTE MANUAL PARA FAMILIARIZARSE CON
LAS ADVERTENCIAS E INSTRUCCIONES DE SEGURIDAD.
CONSERVE ESTAS INSTRUCCIONES JUNTO CON LA HERRAMIENTA PARA FUTURAS CONSULTAS.
ADVERTENCIA

Advertisement

loading
Need help?

Need help?

Do you have a question about the NF665/15 and is the answer not in the manual?

Questions and answers

Related Manuals for Max NF665/15

Summary of Contents for Max NF665/15

  • Page 1 NF665/15 15 GA. FINISH NAILER 15. CLOUEUR DE FINITION A ANGLE DE 15 Ga CLAVADORA DE ACABADO ANGULAR DE CALIBRE 15 OPERATING AND MAINTENANCE MANUAL MANUEL D'UTILISATION ET D'ENTRETIEN MANUAL DE OPERACIONES Y MANTENIMIENTO BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN- STRUCTIONS.
  • Page 2 INDEX INDEX ÍNDICE ENGLISH Page to 12 FRANÇAIS Page to 22 ESPAÑOL Page to 32 DEFINITIONS OF SIGNAL WORDS WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in mi- nor or moderate injury.

  • Page 3: Table Of Contents

    ENGLISH OPERATING AND MAINTENANCE MANUAL INDEX 1. GENERAL SAFETY WARNINGS ............3 2. SAFETY WARNING ................4 3. SPECIFICATIONS AND TECHNICAL DATA ........7 4. AIR SUPPLY AND CONNECTIONS............8 5. INSTRUCTIONS FOR OPERATION............8 6. MAINTENANCE .................12 7. STORAGE ..................12 8. TROUBLE SHOOTING/REPAIRS .............12 BEFORE USING THIS COMPRESSOR, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND INSTRUCTIONS.

  • Page 4: Safety Warning

    Thinner Gasoline KEEP HANDS AND BODY AWAY FROM THE DIS- CHARGE OUTLET DO NOT OPERATE THE TOOL NEAR A FLAMMABLE When loading and using the tool, never place a hand or any SUBSTANCE part of body in fastener discharge area of the tool. It is very Never operate the tool near a flammable substance (e.g., dangerous to hit the hands or body by mistake.
  • Page 5 DO NOT TOUCH THE TRIGGER UNLESS YOU INTEND TO DRIVE A FASTENER 13. DO NOT DRIVE FASTENERS ON TOP OF OTHER FAS- Whenever the air supply is connected to the tool, never TENERS touch the trigger unless you intend to drive a fastener into Driving fasteners on the top of other fasteners may cause the work.
  • Page 6 • Keep the tool in a dry place out of reach of chil- dren when not in use. • Do not use the tool without Safety Warning label. • Do not modify the tool from original design or function without approval by MAX CO., LTD.

  • Page 7: Specifications And Technical Data

    8 Warning Label 9 Outlet NOISE 0 Pusher A-weighted single-event sound power level NF665/15------ LWA, 85.5 dB A-weighted single-event emission sound pressure level at work station NF665/15------ LpA, 79.4 dB These values are determined and documented in accord- TOOL SPECIFICATIONS ance to EN12549 : 1999.

  • Page 8: Air Supply And Connections

    For these reasons, safety glasses or goggles shall always HOSES: Hose has a min. ID of 1/4" (6 mm) and max. length of be worn when operating the tool.
  • Page 9 NAIL LOADING TEST OPERATION Adjust the air pressure at 70 p.s.i. (5 bar) and connect the air supply. Without touching the trigger, depress the contact arm against the work-piece. Pull the trigger (The tool must fire the fastener.) With the tool off the work-piece, pull the trigger. Then depress the connect arm against the work-piece.
  • Page 10 DRIVING FASTENERS NOTE : This tool is shipped with SEQUENTIAL TRIP selected. SEQUENTIAL TRIP The Sequential Trip requires the operator hold the tool against the work before pulling the trigger. This makes accurate fastener placement easier, for instance on framing, toe nailing and crating applications. The Sequential Trip allows exact fastener location without the pos- sibility of driving a second fastener on recoil, as described under "Contact Trip".
  • Page 11 CLEARING JAMMED NAILS Latch Cover WARNING Driver Guide A ALWAYS-disconnect air supply before adjusting adjustment dial. If an adjustment is required, disconnect air supply. Refer to the figure for direction to turn the dial. Reconnect air supply. THE CONTACT TIP WARNING Contact tip ALWAYS-disconnect air supply before clearing jammed nails.

  • Page 12: Maintenance

    The troubleshooting and/or repairs shall be carried out only by inside compressor to pass into the tool directly. This causes the MAX CO., LTD. authorised distributors or by other specialists. rust and wear, and results in a poor operating performance.
  • Page 13 • Las caracteristicas y la concepcion de los productos mencionados en este manual estan sujetas a modificaciones sin preaviso debido a nuestros esfuerzos continuos para mejorar la calidad de nuestros productos. 257 East 2nd Street Mineola, NY 11501, U.S.A. TEL: 1-800-223-4293 FAX: (516)741-3272 www.maxusacorp.com (USA Site) wis.max-ltd.co.jp/int/ (GLOBAL Site) 4009539 110622-00/00...