Download
Share
Print this page
Max NF565/16 Operating And Maintenance Manual
  1. Manuals
  2. Brands
  3. Max Manuals
  4. Nail Gun
  5. NF565/16
  6. Operating and maintenance manual

Max NF565/16 Operating And Maintenance Manual

16 ga. finish nailer
Hide thumbs

Advertisement

Quick Links

Download this manual
NF565/16
16 GA. FINISH NAILER
16. CLOUEUR DE FINITION A ANGLE DE 16 Ga
CLAVADORA DE ACABADO ANGULAR DE CALIBRE 16
OPERATING AND MAINTENANCE MANUAL
MANUEL D'UTILISATION ET D'ENTRETIEN
MANUAL DE OPERACIONES Y MANTENIMIENTO
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN-
STRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
WARNING
AVANT D'UTILISER CET OUTIL, LIRE CE MANUEL ET LES CONSIGNES DE SÉCURITÉ AFIN DE
GARANTIR UN FONCTIONNEMENT SÛR.
CONSERVER CE MANUEL EN LIEU SÛR AVEC L'OUTIL AFIN DE POUVOIR LE CONSULTER UL-
TÉRIEUREMENT.
AVERTISSEMENT
ANTES DE UTILIZAR ESTA HERRAMIENTA, LEA DETENIDAMENTE ESTE MANUAL PARA FAMILIARIZARSE CON
LAS ADVERTENCIAS E INSTRUCCIONES DE SEGURIDAD.
CONSERVE ESTAS INSTRUCCIONES JUNTO CON LA HERRAMIENTA PARA FUTURAS CONSULTAS.
ADVERTENCIA

Advertisement

loading
Need help?

Need help?

Do you have a question about the NF565/16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Max NF565/16

Summary of Contents for Max NF565/16

  • Page 1 NF565/16 16 GA. FINISH NAILER 16. CLOUEUR DE FINITION A ANGLE DE 16 Ga CLAVADORA DE ACABADO ANGULAR DE CALIBRE 16 OPERATING AND MAINTENANCE MANUAL MANUEL D'UTILISATION ET D'ENTRETIEN MANUAL DE OPERACIONES Y MANTENIMIENTO BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN- STRUCTIONS.
  • Page 2 INDEX INDEX ÍNDICE ENGLISH Page to 11 FRANÇAIS Page to 20 ESPAÑOL Page to 29 DEFINITIONS OF SIGNAL WORDS WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in mi- nor or moderate injury.

  • Page 3: Table Of Contents

    ENGLISH OPERATING AND MAINTENANCE MANUAL INDEX 1. GENERAL SAFETY WARNINGS ............3 2. SAFETY WARNING ................4 3. SPECIFICATIONS AND TECHNICAL DATA ........7 4. AIR SUPPLY AND CONNECTIONS............8 5. INSTRUCTIONS FOR OPERATION............8 6. MAINTENANCE .................11 7. STORAGE ..................11 8. TROUBLE SHOOTING/REPAIRS .............11 BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN- STRUCTIONS.

  • Page 4: Safety Warning

    Thinner Gasoline KEEP HANDS AND BODY AWAY FROM THE DIS- CHARGE OUTLET DO NOT OPERATE THE TOOL NEAR A FLAMMABLE When loading and using the tool, never place a hand or any SUBSTANCE part of body in fastener discharge area of the tool. It is very Never operate the tool near a flammable substance (e.g., dangerous to hit the hands or body by mistake.
  • Page 5 DO NOT TOUCH THE TRIGGER UNLESS YOU INTEND TO DRIVE A FASTENER 13. DO NOT DRIVE FASTENERS ON TOP OF OTHER FAS- Whenever the air supply is connected to the tool, never TENERS touch the trigger unless you intend to drive a fastener into Driving fasteners on the top of other fasteners may cause the work.
  • Page 6 • Keep the tool in a dry place out of reach of chil- dren when not in use. • Do not use the tool without Safety Warning label. • Do not modify the tool from original design or function without approval by MAX CO., LTD.

  • Page 7: Specifications And Technical Data

    TECHNICAL DATA 8 Warning Label NOISE 9 Outlet A-weighted single-event sound power level NF565/16------ LWA, 92.3 dB A-weighted single-event emission sound pressure level at work station NF565/16------ LpA, 84.2 dB These values are determined and documented in accord- TOOL SPECIFICATIONS ance to EN12549 : 1999.

  • Page 8: Air Supply And Connections

    For these reasons, safety glasses or goggles shall always HOSES: Hose has a min. ID of 1/4" (6 mm) and max. length of be worn when operating the tool.
  • Page 9 NAIL LOADING TEST OPERATION Adjust the air pressure at 70 p.s.i. (5 bar) and connect the air supply. Without touching the trigger, depress the contact arm against the work-piece. Pull the trigger (The tool must fire the fastener.) With the tool off the work-piece, pull the trigger. Then depress the connect arm against the work-piece.
  • Page 10 DRIVING DEPTH ADJUSTMENT DIAL Adjustment dial Switching lever Turn the switching lever in the direction of the arrow. WARNING ALWAYS-disconnect air supply before adjusting adjustment dial. If an adjustment is required, disconnect air supply. Refer to the figure for direction to turn the dial. Reconnect air supply.

  • Page 11: Maintenance

    All quality tools will eventually require servicing or replace- ment of parts because of wear from the normal use. 8. TROUBLE SHOOTING/REPAIRS The troubleshooting and/or repairs shall be carried out only by the MAX CO., LTD. authorised distributors or by other specialists.
  • Page 12 • Las caracteristicas y la concepcion de los productos mencionados en este manual estan sujetas a modificaciones sin preaviso debido a nuestros esfuerzos continuos para mejorar la calidad de nuestros productos. 257 East 2nd Street Mineola, NY 11501, U.S.A. TEL: 1-800-223-4293 FAX: (516)741-3272 www.maxusacorp.com (USA Site) wis.max-ltd.co.jp/int/ (GLOBAL Site) 4009538 111019-00/00...

This manual is also suitable for:

Nf235f/18(ce)Nf255f/18(ce)