Advertisement
LED LIGHT ASSEMBLY REPLACEMENT
Important:
Note:
Before changing the lights, make sure that the appliance is turned off and unplugged.
Protect against danger when changing lights, such as wearing gloves
Changing the lights:
(1) Switch off the appliance and unplug it.
(2) Slide the front part of the cooker hood.
(3) The al filter should be detached first. Press the lock and pull it downward.(4)
Replace with same type of light.
ILCOS D code for this lamp is: DBS-2/65-H-120/33
•
– LED modules –rectangle lamp
– Max wattage: 1×2 W
– Voltage range: AC 110-240V
– Dimensions:
The light must be replaced by the manufacturer, its service
agent or similarly qualified persons.
Always
switch
off
any operations on the appliance. When handling the light, make
sure it has completely cooled down before any direct contact to
hands.
When handling the light hold with a cloth or gloves to ensure
perspiration does not come in contact with the light as this can
reduce the life of the light.
the
electricity
supply
12
before carrying out
.
Advertisement
