2.
Fit the outlet on top of range hood body.
3.
Install the range hood onto the bottom of cabinet board, fasten 6pcs Screw (M4x35mm) with
washers. If gap is there between range hood back and cabinet end, fasten 2pcs Screw
(ST3x12mm) and metal plate onto body to fill it.
Warning: Failure to install the screws or fixing device in accordance with these instructions may
result in electrical hazards
Installation of charcoal filters
Charcoal filter is optional accessory.The installation procedure of activated carbon filter is as below.
1.
Remove grease mesh filters.
2.
Follow up below instruction you can remove or install charcoal filters.
9