Tape Length Setting; Recording Mode Setting; Tape Remaining Time; Recording Mode (Sp/Lp) Indicator - JVC GR-AX958EG Instruction Manual

Jvc gr-ax958eg: instruction manual
Table of Contents

Advertisement

12
EN
Viewfinder
MENU
4
MENU END
FOCUS
AUTO
EXPOSURE
AUTO
DATE TIME
25. 12. 98
TELE MACRO
OFF
TAPE LENGTH
T60
M. W. B.
AUTO
ZOOM SPEED
FAST
4
NEXT
TAPE LENGTH
T30
T45
T60
EXIT
MENU
4
MENU END
FOCUS
AUTO
EXPOSURE
AUTO
DATE TIME
25. 12. 98
TELE MACRO
OFF
TAPE LENGTH
T30
M. W. B.
AUTO
ZOOM SPEED
FAST
4
NEXT
SP/LP Recording
Mode Button
Select Dial
System Select Switch
Viewfinder
SP
Menu Screen
TAPE LENGTH
Setting Menu
MENU Jog Dial
Tape length
T30

indicator

Recording mode
indicator
VIDEO GETTING STARTED

Tape Length Setting

Set the tape length according to the length of the tape
used.
ACCESS MENU SCREEN
1
First set the System Select Switch to "VIDEO", then
set the Power Switch to "CAMERA". Turn the Select
Dial to any position except AUTO LOCK, then press
the MENU Jog◊ Dial.
SELECT FUNCTION
2
Rotate the MENU Jog Dial to move the highlight bar
to "TAPE LENGTH", then press it. The TAPE
LENGTH Setting Menu appears.
SET TAPE LENGTH
3
Rotate the MENU Jog Dial to move the highlight bar
to the correct setting. T30=30 minutes of recording
time, T45=45 minutes, and T60=60 minutes.
•If you decide you want to return the tape length to
the previous setting, rotate the MENU Jog Dial to
move the highlight bar to "EXIT".
CLOSE MENU
4
Press the MENU Jog Dial. The Menu Screen
reappears and the highlight bar is on "MENU END".
Then press the MENU Jog Dial again to close the
Menu Screen.
NOTES:
The tape remaining time (
viewfinder is correct only if the correct tape length has
been selected.
Once you have set the tape length, it remains un-
changed even if the Select Dial is returned to AUTO
LOCK.
When the System Select Switch is set to "D.S.C.", it is
not possible to set "TAPE LENGTH".

Recording Mode Setting

Set depending on your preference.
SET RECORDING MODE
1
First set the Power Switch to "CAMERA". Press SP/LP
Button for more than 1 second. "SP" (Standard Play)
provides higher picture and sound quality and is
better for dubbing, while "LP" (Long Play) is more
economical, providing twice the recording time.
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
(cont.)
pg. 15) displayed in the

Advertisement

Table of Contents
loading

Table of Contents