Basic Connections To Vcr - JVC GR-AX958EG Instruction Manual

42
EN
When connecting
the cables, open
the jack cover.
Audio/Video
cable (provided)
VCR
Antenna
RF unit
RF-V5E
(optional)
To AUDIO, VIDEO and
RF DC OUT connectors
NOTES:
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack.
To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder 's Power Switch to "CAMERA", then set
your TV to the appropriate input mode.
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.
When using the provided DC cord, make sure you
connect the end of the cable with the core filter to
the camcorder. The core filter improves
performence of equipment.
Attach the provided Core Filter to the provided
Audio/Video cable. Connect the end of the cable
with the Core Filter to the camcorder.
To AUDIO and VIDEO
OUT connectors
Core Filter
To
AUDIO and
VIDEO IN
connectors

BASIC CONNECTIONS TO VCR

There are three basic types of connections. When making
the connections, refer also to your VCR and TV
instruction manuals.
Connection To A VCR
(Editing, Dubbing and Playback)
NOTE:
Use the provided Audio and Video cables.
CONNECT CAMCORDER TO VCR
1
As shown in the illustration to the left, connect the
Audio and Video cables between the AUDIO and
VIDEO OUT connectors on the camcorder and
those on the VCR.
SUPPLY POWER
2
Turn on the camcorder, the VCR and the TV.
SELECT MODE
3
Set the VCR to its AUX input mode, and set the TV
to its VIDEO mode.
Connection To A TV With A/V Input
Connectors (Playback ONLY)
B
NOTE:
Use the provided Audio and Video cables.
CONNECT CAMCORDER TO TV
1
As shown in the illustration to the left, connect the
Audio and Video cables between the AUDIO and
VIDEO OUT connectors on the camcorder and
those on the TV.
SELECT MODE
2
Set the TV to its VIDEO or AV mode (as specified in
its instructions).
Connection To A TV With NO A/V Input
Connectors (Playback ONLY)
NOTE:
Use the optional RF-V5E RF unit.
*Refer to the RF-V5E instruction manual for connection
procedure.
A