Table of Contents
Advertisement
50
EN
Menu Screen Explanations (cont.)
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
D. ZOOM
COLOUR BAR
JLIP ID NO.
DEMO MODE
= Factory setting and when the Select Dial is set to AUTO LOCK
D.S.C. SHOOTING
Setting is impossible.
This feature allows you to set the parameters for Self-Timer (
The tally lamp comes on to signal the start of recording.
ON
The tally lamp remains off at all times.
OFF
Original titles can not be recorded on digital still pictures. Please use this function
for video recording (
ON
Allows you to use the Digital Zoom. By digitally processing and
magnifying images, zooming is possible from 22 times (the
optical zoom limit), to a maximum of 44 times digital magnifi-
cation.
Digital Zoom is not available. Only optical zoom (maximum
OFF
22x magnification) can function. When set to "OFF" during
Digital Zoom, zoom magnification changes to 22x.
Does not display colour bars. Normal screen is recorded.
OFF
Makes the normal screen disappear, then displays colour bars.
ON
By recording colour bars at the beginning or end of a tape, an
effect similar to professional productions can be given to your
tape.
NOTE:
While the colour bars are displayed, the camcorder's other
functions are disabled.
This number is necessary when connecting the camcorder to a device such as a
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory
setting is 07.
Automatic demonstration will not take place.
OFF
Demonstrates certain functions such as Fade/Wipe, Instant
ON
Titles etc. When "DEMO MODE" is set to "ON" and the Menu
Screen is closed, demonstration starts.
NOTES:
pg. 27).
When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
By turning off the camcorder, "DEMO MODE" is set to "OFF"
automatically.
During demonstration, all functions except zoom are
disabled.
Advanced Features (cont.)
pg. 36).
Advertisement
Table of Contents
