ADC PG-PLUS PLL-723 Manual page 46

Test Submenu
4 A warning displays when a channel is selected for the test.
5 Type at the
Continue With Test?
Y
test.
Performing an SDT on one of the ISDN channel interrupts service on the line under test. The remaining
lines on the PG-Plus system remains in service.
Upon tests completion, the SDT Results screen with the Subscriber Test, Failure Condition, and Test Status
results displays. Tests are performed in the order of display. If a test fails, the remaining tests are not
performed (as per TR-909). It takes approximately 7 to 8 seconds for all tests to complete.
6 Press to move up a menu level, or
ESC
36
prompt. A
Test In Progress
+ to return to the PAU/PMU Main menu.
CTRL R
January 6, 2003
message displays on the screen throughout the
SCP-PLL723-010-04H
PLL-723 List 1