ADC PG-FLEXPLUS PMU-712 Manual page 2

Revision History of This Practice
Revision Release Date
01 July 11, 2001
02 July 31, 2001
03 August 17, 2001
04 December 20, 2001 Release to rebrand document to comply with ADC standards
05 July 8, 2002
06 January 6, 2003
07 August 6, 2003
08 March 1, 2004
©Copyright 2004 ADC Telecommunications, Inc. All Rights Reserved.
ADC and PG-Flex Plus are registered trademark s of ADC Telecommunications, Inc. No right, license, or interest to such trademarks
is granted hereunder, and you agree that you shall assert no such right, license, or interest with respect to such trademarks. Other
product names mentioned in this document are used for identification purposes only and may be trademarks or registered
trademarks of their respective companies.
Information contained in this document is company private to ADC Telecommunications, Inc., and shall not be modified, used,
copied, reproduced or disclosed in whole or in part without the written consent of ADC.
Contents herein are current as of the date of publication. ADC reserves the right to change specifications at any time without notice.
Information furnished by ADC is believed to be accurate and reliable. In no event shall ADC be liable for any damages resulting
from the loss of data, loss of use, or loss of profits and ADC further disclaims any and all liability for indirect, incidental, special,
consequential or other similar damages. This disclaimer of liability applies to all products, publications and services during and
after the warranty period.
Revisions Made
Initial Release
Release to:
1 correct all custom defaults for Power A Missing and Power B Missing in
Types," on page 61.
2 correct table captions for Table 21, "Service Loss Alarm Types," on page 62
on page 64.
3 correct custom default for Environmental Alarm n (where n = 1 to 4), List 3 in
"Environmental Alarm Types," on page
Release to:
1 make corrections in "Specifications" on page 10. Height was changed to 5.50 in. (14.0 cm)
and Length was changed to 10.25 in (26.0 cm).
2 correct Figure 6, "Front Panel Craft Port to Terminal Connections," on page 15
3 delete second and third sentences in second paragraph after Figure 13 on page 20.
4 make corrections in "Logging On" on page 25 reference to the establishment of a password.
The third bullet, third sentence was revised.
5 correct first line of second bullet on page 22.
6 correct second line of first paragraph in the Download Retry section on page 70.
7 correct other non-service affecting changes on pages 6, 7 and 52.
Eliminate references to the PMU-712 List 3
Updated Product Support Information
Updated external alarms
Updated DB-25 alarm information
March 1, 2004
65.
SCP-PMU712-020-08H
Table 20, "Alarm
and Table 22
Table 24,
PMU-712 List 2