Klarstein 10041143 Manual page 29

4. When the symbol
unit stops. As soon as the ice cubes have been removed, the appliance restarts
operation. If the ON/OFF button is pressed for more than 5 seconds while the
appliance is in operation, the ice cubes are dispensed automatically. When you
press the ON/OFF button, the unit is switched off.
The unit has two different timer settings. When the unit is switched on, the
timer can be set so that the unit switches off automatically after a certain time.
When the unit is switched off, the timer can be set so that the unit switches on
automatically after a certain time.
When you press the TIMER button, [1H] is displayed on the screen. Press the
+ or - buttons to increase or decrease the time. While you are making the
setting, the [H] symbol flashes on the screen. 5 seconds after the setting is
complete, the timer setting symbol [H] lights up permanently on the screen.
5. Draining the water: take off the water drain cap at the bottom of the device
and drain the water. It is recommended to change the water every 24 hours
and to clean the appliance at least every 3 days.
Automatic self-cleaning programme
Starting the self-cleaning programme: Plug in the device and press and hold the
TIMER/CLEAN button on the control panel for more than 5 seconds. The self-
cleaning process will start. This takes about 20 minutes. The symbol
on the screen and [20 M] is displayed.
Cancellation of the self-cleaning programme:
The self-cleaning programme takes about 20 minutes to complete. As soon as the
programme is finished, the device switches off automatically. It is also possible to
force the self-cleaning programme to stop by pressing the ON/OFF button.
is displayed, it means that the ice cube tray is full. The
rotates
EN
29