Key Lock; Interior Light - Hanseatic HGTI6082C14T7735ES User Manual

You can add more dishes even if the dish-
washing programme is already running.
In this case, the current dishwashing pro-
gramme should only have been running for
a short time, as only then can the additional
dishes be cleaned.
1. Press the button (11) to interrupt the
dishwashing programme.
The LED next to the programme symbol
will now remain illuminated.
2. Open the appliance door slightly and wait
until both spraying arms have come to a
standstill.
3. Slowly open the appliance door all the
way.
4. Add the dishes.
5. Close the appliance door.
6. Press the button once again.
After approximately 10 seconds the appli-
ance will continue the programme.
A beep will sound at regular intervals
while the dishwashing programme is
paused.

Key lock

(4)
Dishwasher operation Programme table
The dishwasher buttons can be locked, e.g.
for childproofing purposes.
• To activate key lock, press and hold the
plus and minus buttons (12) simultane-
ously until the
on the display.
The buttons are locked.
• To deactivate key lock, press and hold
both buttons again until the indicator
goes out on the display.
The buttons are unlocked.
(11)

Interior light

WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■ Do not remove the cover from the in-
terior lighting.
■ Do not attempt to replace the interi-
or light.
NOTICE
Risk of damage to property!
Improper handling of the appliance
may damage it.
■ The lighting in the appliance is exclu-
sively for lighting the inside of the ap-
pliance. It is not suitable for lighting
a room.
Maintenance-free LEDs are used as lights. If
the interior light does not work, please con-
tact our service department (see page EN-42).
(12)
Page EN-25
indicator (4) appears