Troubleshooting Guide - XPower FM-65B Owner's Manual

Cleaning the Atomization Assembly
When not in use, unscrew the misting nozzles, store the nozzles in a dry indoor
place out of reach of children. The nozzles must be dried completely before stored.
• Disassemble the nozzles (See illustration above) and unscrew the water faucet
adapter.
• For model FM-68W, FM-68W, FT-68W or FT-88W, disassemble the pumping hose.
• Soak the parts with soapy water or mild (or alkaline) detergent for several hours.
DO NOT use vinegar or other acidic detergent.
• Optionally, use the nozzle cleaner to clean the nozzle hole from the inner surface.
• When finished, dry the surfaces completely and reassemble the parts.

Troubleshooting Guide

PROBLEM
Machine does not
start
POSSIBLE CAUSE
No electricity.
The power cord is not properly
plugged in.
The timer switch is set to "0"
position.
Battery is not activated yet.
SOLUTION
Check for power supply.
Remove and reconnect the
power cord.
Set the timer switch to "ON"
position.
Please charge the battery
until to activate the battery
before the first usage.
English - 13