Troubleshooting Guide - XPower FM-68 Owner's Manual

Troubleshooting Guide

PROBLEM
Misting Fan does
not start
Unit runs but the
speed is abnormal
Misting function is
abnormal
If troubleshooting does not resolve your problem, please contact XPOWER or other
parties authorized by XPOWER for further instructions.
English - 12
POSSIBLE CAUSE
No electricity.
The power cord is not
properly plugged in.
The machine is working
under an extreme
temperature.
The ground fault protection
on the GFCI is triggered.
The anti-toppling safety
switch is triggered.
Air inlet or air outlet is
blocked.
The pumping / water hose is
blocked.
The atomization assembly is
blocked.
The water switch is off.
SOLUTION
Check for power supply.
Remove and reconnect the
power cord.
Turn off the machine and
unplug it. Let the machine cool
down to normal temperature.
Check and reset the GFCI on
the plug.
Check and reset the anti-
toppling safety switch.
Remove blockage.
Remove blockage.
Remove blockage.
11: Atomization Assembly
Maintenance)
Check for water supply.
(See Page