Table of Contents
Advertisement
Replacing the Fuse
FUSE
Fuse Cover
• Grasp plug and remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
• Slide open the fuse cover on top of attachment plug. Remove the fuse
carefully.
• To reduce risk of fire, replace fuse only with 5A/125V fuse.
Slide close the fuse cover on top of the attachment plug.
To reduce risk of fire. DO NOT replace the attached plug, which contains a
safety device (fuse), with any other plug. Discard product if the attachment plug
is damaged.
Troubleshooting Guide
PROBLEM
Misting Fan does not
start
Unit runs but the
speed is abnormal
Misting function is
abnormal
If troubleshooting does not resolve your problem, please contact XPOWER or other
parties authorized by XPOWER for further instructions.
POSSIBLE CAUSE
No electricity.
The power cord is not properly
plugged in.
The machine is working under
an extreme temperature.
Air inlet or air outlet is blocked.
The water hose is blocked.
The water switch is off.
FUSE
Fuse
SOLUTION
Check for power supply.
Remove and reconnect the power
cord.
Turn off the machine and unplug
it. Let the machine cool down to
normal temperature.
Remove blockage.
Remove blockage.
Check for water supply.
English - 9
Advertisement
Table of Contents
