Overhaul; Cleaning - PANDROL Rosenqvist SL400 Operation And Maintenance Manual

Doc id: ENG_OMM_SL400_SL450_P01

10.3 Overhaul

1. Every six months, check and retighten the screws for the installation plate.
• Screws and nuts, at turning unit: M16. Torque: 190 Nm.
• Screws, at main frame: M12. Torque: 80 Nm.
2. Once a year, check the following;
• Cracks and damages on the frame construction.
• Wearing and damages at shafts.
• Plastic spacers on main frame.
• Plastic spacers on movable sleeper grapple units.
• Wear plates on sleeper positioner.
• Wearing and damages to grapple arms.
• Wearing and damages on seals and pistons in hydraulic cylinders.
3. Repair damages in the body colour by applying original paint to prevent steel from
rusting. Original colour: RAL 1004.
4. We recommended that any overhaul is made by Pandrol qualified personnel.

10.4 Cleaning

• Wash with warm water and a mild detergent.
• Grease and lubricate the sleeper layer after cleaning.
34/37
© Pandrol AB