Table of Contents
Advertisement
Quick Links
AS/NZS 1891.1:2007
Industrial fall-arrest systems
and devices Harnesses and
ancillary equipment
Lic: BMP 537160
2
7
12
13
5
5
4
3
2
603XXXXX
3
4
613XXXXX
Certified to
8
9
10
11
Models
603XS1020
603S1020
603M1020
603L1020
603XL1020
603XXL1020
603S1022
603M1022
603L1022
603XL1022
603XXL1022
603XS1023
603S1023
603M1023
603L1023
603XL1023
603S1034
603M1034
603L1034
603XL1034
603S1036
603M1036
603L1036
603XL1036
603XS2018
603S2018
603M2018
603L2018
603XL2018
603XXL2018
603S2018B
603M2018B
603L2018B
603XL2018B
603XS2019
603S2019
603M2019
603L2019
603XL2019
603XXL2019
Certified by
BSI Certi ed Product
1
1
Size
Attachment Elements
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
EXoFiT NEX
FuLL BoDy HARNESS
uSER iNSTRuCTioNS
9598625 Rev. E
2
3
4
5
6
7
8
9
Buckles and Adjusters
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
10
11
12
13
14
15
Belt
& Pad
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
© 3M 2020
Advertisement
Table of Contents
Related Manuals for 3M DBI SALA ExoFit Nex 603XS1020
Summary of Contents for 3M DBI SALA ExoFit Nex 603XS1020
- Page 1 √ 603S2019 √ √ √ √ √ √ 603M2019 √ √ √ √ √ √ 603L2019 √ √ √ √ √ √ 603XL2019 √ √ √ √ √ √ 603XXL2019 √ √ √ √ √ √ 613XXXXX © 3M 2020...
- Page 2 Belt Models Size Attachment Elements Buckles and Adjusters & Pad 603S2020 √ √ √ √ √ √ 603M2020 √ √ √ √ √ √ 603L2020 √ √ √ √ √ √ 603XL2020 √ √ √ √ √ √ 603S4020 √ √...
- Page 3 Belt Models Size Attachment Elements Buckles and Adjusters & Pad 643S2018 √ √ √ √ √ √ √ √ √ 643M2018 √ √ √ √ √ √ √ √ √ 643L2018 √ √ √ √ √ √ √ √ √ 643XL2018 √...
- Page 5 ü ü TIGHTEN CONNECT LOOSEN RELEASE...
- Page 10 ONLY COMPETENT USERS SHOULD USE THIS EQUIPMENT 1. Pick harness up by rear D-ring and ensure there INSPECTION LOG are no tangles in the webbing. Disconnect all straps. MANUFACTURER'S INSTRUCTIONS MUST BE FOLLOWED 2. Hold the harness from behind with the shoulder FALL NOT TO EXCEED 2 METRES straps in each hand and don like a jacket.
-
Page 11: Safety Information
Avoid surfaces and objects that can damage the user or equipment. Ensure there is adequate fall clearance when working at height. Never modify or alter your fall protection equipment. Only 3M or parties authorized in writing by 3M may make repairs to the equipment. -
Page 12: Product Description
Before using this equipment, record the product identification information from the ID label in the “Inspection and Maintenance Log” at the back of this manual. Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M Technical Services for updated instruction manuals. -
Page 13: Product Application
1 Fall Arrest Free Falls: Free falls greater than 2 m (6.6 ft) may be permitted when users are secured to the anchorage with a connecting sub- system which limits maximum arresting force to 6 kN (1,349 lbs) and is authorised for such use (i.e., 3M Force 2™ Lanyards). -
Page 14: System Requirements
Ensure all connectors are fully closed and locked. 3M connectors (snap hooks and carabiners) are designed to be used only as specified in each product’s user’s instructions. See Figure 6 for inappropriate connections. 3M snap hooks and carabiners should not be connected: To a D-Ring to which another connector is attached. -
Page 15: Harness Use
Twin Nano-Lok™ SRDs, (C) 3M Single Nano-Lok™ SRDs, (D) Protecta Twin Rebel™ SRDs, (E) 3M Twin Talon™ SRD. Other manufacturers’ SRDs can also be mounted on the ExoFit Nex Harness in similar fashion. See the SRD manufacturer’s instructions for requirements and installation instructions specific to the SRD. - Page 16 DONNING AND FITTING THE ExOFIT NEx FULL BODY HARNESS: Figure 14 illustrates donning and fitting of the ExoFit Nex Full Body Harness. Prior to each use, inspect the harness per the checklist on the “Inspection and Maintenance Log (Table 1)”. To don and fit the harness: Procedures for buckling and adjusting the straps on you ExoFit Nex Harness will vary with the harness model.
-
Page 17: Maintenance, Service, And Storage
CLEANING: 3M full body harnesses must be cleaned in accordance with 3M instructions. To clean the harness, wash in a mild, bleach-free detergent and then rinse. The harness should afterwards be hung to air-dry. Water used for cleaning and temperatures used to air-dry should never exceed 130°F (54.4°C). - Page 18 Table 1 – Inspection and Maintenance Log Serial Number(s): Date Purchased: Model Number: Date of First Use: Inspection Date: Inspected By: Inspection: (See Section 2.2 for Inspection Frequency) Component: User Competent Person Harness Hardware Inspect harness hardware including buckles (1), adjusters (2), D-rings (3), Easy-Link (4), (Diagram 1) loop keepers (5), lanyard parking (6), etc.
- Page 19 LIMITED REMEDY: Upon written notice to 3M, 3M will repair or replace any product determined by 3M to have a factory defect in workmanship or materials. 3M reserves the right to require product be returned to its facility for evaluation of warranty claims. This warranty does not cover product damage due to wear, abuse, misuse, damage in transit, failure to maintain the product or other damage beyond 3M’s control.
- Page 20 3M’s option, to the repair or replacement of the goods or the refund of the purchase price of the goods. 3M will not be liable for any equipment damage resulting from wear, abuse, damage in transit, failure to maintain the product or other damage beyond the control of 3M.
Need help?
Do you have a question about the DBI SALA ExoFit Nex 603XS1020 and is the answer not in the manual?
Questions and answers