Installation Manual
H3C S9500 Series Routing Switches
3.3.3 Mounting the Switch
Note:
Make sure that supports have been installed in corresponding positions
and the supports can bear the switch weight.
1)
Two people are required to lift the switch. Put the switch on the
supports and slide it into the cabinet until the rack-mounting ears
touch against the front square-holed columns.
2)
Fix the rack mounting ears onto the square-holed columns with
screws.
Figure 3-3 Install the switch into a standard 19-inch rack
3.3.4 Verifying the Installation
After installing the switch into the rack, check the items listed in
Table 3-1 Checklist for switch installation
The cable management bracket is well fixed
on the left rack-mounting ear.
Item
3-3
Chapter 3 Installing the Switch
Table
Result
Remarks
Yes
No
3-1.