Advertisement
Quick Links
Placement and Maintenance
Your Ma Side Table is designed for indoor use on level
floors.
Furniture with hard lacquer, wax polish or painted surface
should be dusted with a dry cloth. Spillages should be wiped
up as soon as possible. Our furniture will endure most
temperatures in the home but it is best to avoid placing
furniture next to heat sources such as radiators or fires.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, visit our website
www.mossdesign.us
MA
SIDE TABLE
YNG TAL 14 / MFMT5 D:04.02.2021 / RN 000
Tool Required:
Mallet or Hammer
Tool Provided:
T1 M4 Allen Key x 1
H1 Wooden Dowel
(8x35mm) x 4
H2 Allen Head Bolts
(Black) (6x70mm) x 4
C1 Top Panel x 1
C2 Leg Frame x 1
C3 Leg Frame x 1
Advertisement
Related Manuals for moss DESIGN MA
Summary of Contents for moss DESIGN MA
- Page 1 SIDE TABLE Tool Required: Mallet or Hammer Placement and Maintenance Your Ma Side Table is designed for indoor use on level Tool Provided: floors. T1 M4 Allen Key x 1 Furniture with hard lacquer, wax polish or painted surface should be dusted with a dry cloth. Spillages should be wiped H1 Wooden Dowel up as soon as possible.
- Page 2 Step 2 - Attach the dowels to leg frames. Insert 4 wooden dowels H1 into their slots by using a mallet. Step 3 - Place the leg frame on the top panel. Place the leg C2 under the top panel C1 as shown below. Then insert 2 allen head bolts H2 into their slots and tighten with the allen key T1.
- Page 3 Place the leg frame C3 on the leg C2 as shown below. Then insert 2 allen head bolts H2 into their slots and tighten with the allen key T1. Step 5 - End of the assembly. Lift the unit to standing position carefully. Moss Design is a trade name of a Colorado company Moss Furniture LLC www.mossdesign.us...
Need help?
Do you have a question about the MA and is the answer not in the manual?
Questions and answers