Advertisement
Quick Links
Placement and Maintenance
Your Sera Bed Wide Legs are designed for indoor use on
level floors. Furniture with hard lacquer, wax polish or
painted surface should be dusted with a dry cloth.
Spillages should be wiped up as soon as possible. Our
furniture will endure most temperatures in the home but it
is best to avoid placing furniture next to heat sources such
as radiators or fires.
Step 1
Unpack and identify all the parts listed here. It is necessary
to have two people to carry and assemble units weighing
over 50 lbs. The assembly workspace should be a
non-marring surface, such as a carpet. For missing
hardware pieces, visit our website www.mossdesign.us
C1 Leg x1
SERA BED
WIDE LEGS
C2 Leg x1
C2 Leg x1
C1 Leg x1
1
Tool Required:
Mallet
Tool Provided:
T1 M4 Allen Key x 1
H1 Wooden Dowel
(8x35mm) x8
H2 Bolt
(M6x40mm) x 16
Advertisement
Related Manuals for moss DESIGN SERA BED
Summary of Contents for moss DESIGN SERA BED
- Page 1 WIDE LEGS Tool Required: Placement and Maintenance Mallet Your Sera Bed Wide Legs are designed for indoor use on level floors. Furniture with hard lacquer, wax polish or painted surface should be dusted with a dry cloth. Tool Provided: Spillages should be wiped up as soon as possible. Our...
- Page 2 Step 2 - Attach the dowels to the legs. Place the 8x wooden dowels H1 into their slots on the wide legs C1 and C2 by using a mallet as shown below. Step 3 - Legs Place the wide legs C1 and C2 onto the corner blocks C7.
- Page 3 Step 4 - Connect the wide legs. Connect the wide legs C1 and C2 to the bedframe using the 16x bolts H2. Tighten the bolts by using the allen key T1 as shown below. H2 H2 H2 H2 H2 H2 Step 5 - End of the assembly.
Need help?
Do you have a question about the SERA BED and is the answer not in the manual?
Questions and answers