moss DESIGN MOSS Quick Start Manual

Table of Contents

Download this manual

Placement and Maintenance

Your Moss Chair is designed for indoor use on level floors.

Furniture with hard lacquer, wax polish or painted surface

should be dusted with a dry cloth. Spillages should be wiped

up as soon as possible. Our furniture will endure most

temperatures in the home but it is best to avoid placing

furniture next to heat sources such as radiators or fires.

Step 1

Unpack and identify the parts listed below. The assembly

workspace should be a non-marring surface such as carpet.

For missing hardware pieces, visit our website

www.mossdesign.us

C2 Back Rest x 3

C3 Cross Rail x 2

C4 Seat top x 1

MOSS

CHAIR

YNG TAL 14 / MFMT10 D:04.02.2021 / RN 000

Tool Provided:

H1 Allen Head Bolt

(Chrome) (M6x60mm) x8

T1 M4 Allen Key x 1

T2 Mallet x 1

C1 Leg Frame x2

Table of Contents

Do you have a question about the MOSS and is the answer not in the manual?

Page 1 Placement and Maintenance H1 Allen Head Bolt (Chrome) (M6x60mm) x8 Your Moss Chair is designed for indoor use on level floors. Furniture with hard lacquer, wax polish or painted surface T1 M4 Allen Key x 1 should be dusted with a dry cloth. Spillages should be wiped up as soon as possible.
Page 2 Step 2 - Attach the first cross rail C3 to the leg frame C1 as shown below. Step 3 - Attach the second cross rail C3 to the leg frame C1 as shown below.
Page 3 Step 4 - Attach the cross rails to the other leg frame C1 as shown below. Step 5 - Install the first back rest C2 as shown below.
Page 4 Step 6 - Install the second back rest C2 as shown below. Step 7 - Install the third back rest C2 as shown below.
Page 5 Step 8 - Place the seat top C4 on a stool. Step 9 - Place the chair on the seat top. Install 8x allen head bolts H1 as shown below. Tighten them by using allen key T1.
Page 6 Step 10 - Lift the unit to standing position carefully. Moss Design is a trade name of a Colorado company Moss Furniture LLC www.mossdesign.us...