Climadiff CLIMA10K1 Manual page 51

RESET Button
7.
Once you have pressed the RESET button, all active settings will be canceled and the remote will retrieve
the initial settings.
ON/OFF Button
8.
The remote control works when this button is pressed, and stops when this button is pressed
again.
FAN SPEED Button (on some models)
9.
It is used to select the fan speed in four steps (Auto / Low / Medium / High):
10. TIMER ON Button
Press this button to start the automatic setting of the start time. Each press will increase the time setting from 30
minutes to 10 hours, then increase from 1 hour to 24 hours.
To cancel, press the button until 0.0 is displayed.
You can combine the TIMER ON button with the TIMER OFF button, for example you can program the turnoff of
the device in 2 hours and program the start of this one in 10 hours. Between the periods of 2h to 10h, the device
will be off.
11. ECONOMY/SLEEP Button
See Using SLEEP / ECO mode.
To cancel this function, press the MODE, FAN SPEED or ON / OFF button.
12. TIMER OFF Button
Press this button to start the automatic setting of the stop time. Each press will increase the time setting from 30
minutes to 10 hours, then increase from 1 hour to 24 hours.
To cancel, press the button until 0.0 is displayed.
You can combine the TIMER ON button with the TIMER OFF button, for example you can program the shutdown
of the device in 2 hours and program the start of this one in 10 hours. Between the period of 2h to 10h, the device
will be off.
13. LOCK Button
Press this button to lock all active settings after which the remote will only accept the LOCK operation. Use the
LOCK mode when you want to prevent the configuration from being changed accidentally. Press the LOCK
51