Adjusting An Image With Incorrect Brightness Or Colors; Adjusting An Upside-Down Image - Epson EH-TW6250 User Manual

Solving Image Problems
a Check the cables connecting your video source to the projector. They
should be:
• Separated from the power cord to prevent interference
• Securely connected at both ends
• Not connected to an extension cable
b If you adjusted the image shape using the projector controls, try
decreasing the Sharpness setting in the projector's Image menu to
improve image quality.
Image > Expert Settings > Sharpness
s
c If you connected an extension power cable, try projecting without it to
see if it caused interference in the signal.
d
Select a computer video resolution and refresh rate that are compatible
with the projector.
g g Related Links
• "Image Quality Settings - Image Menu"
Adjusting an Image with Incorrect Brightness or
Colors
If the projected image is too dark or bright, or the colors are incorrect, try the
following steps until the problem is solved.
a
Try different color modes for your image and environment by selecting
the Color Mode setting in the projector's Image menu.
b Check your video source settings.
c Adjust the available settings in the projector's Image menu for the
current input source, such as Brightness, Contrast, Tint, and Color
Saturation.
p.67
Image > Expert Settings
s
d Make sure you selected the correct Video Range setting in the
projector's Signal menu, if available for your image source.
Signal > Advanced > Video Range
s
e
Make sure all the cables are securely connected to the projector and
your video equipment. If you connected long cables, try connecting
shorter cables.
f Position the projector close enough to the screen.
g g Related Links
• "Image Quality Settings - Image Menu"

Adjusting an Upside-down Image

If the projected image is upside-down, select the correct projection mode.
Extended > Projection
s
g g Related Links
• "Projector Setup Settings - Extended Menu"
99
p.67
p.72