Controlling The Volume With The Volume Buttons - Epson EH-TW6250 User Manual

Controlling the Volume with the Volume Buttons

The volume buttons control the projector's internal speaker system.
You can also control the volume of any external speakers you connected to
the projector.
You must adjust the volume separately for each connected input source.
• To adjust the volume for connected audio/video system, set the
HDMI Link setting to On and the Audio Out Device setting to AV
System in the projector's Settings menu.
a
s Settings > HDMI Link > HDMI Link
s Settings > HDMI Link > Audio Out Device
a Turn on the projector and start a presentation.
b To lower or raise the volume, press the
remote control.
A volume gauge appears on the screen.
To set the volume to a specific level for an input source, select Volume
c
in the projector's Settings menu.
If you have adjusted the volume for your streaming media player to the
lowest level using the remote control for the streaming media player,
you cannot raise the volume using the projector remote control. Raise
a
the volume using the remote control for the streaming media player,
and then adjust the volume again using the projector remote control.
Caution
Do not start a presentation at a high volume setting. Sudden loud noises may cause
hearing loss.
Always lower the volume before powering off, so that you can power on and then
gradually increase the volume.
g g Related Links
• "Projector Feature Settings - Settings Menu"
or buttons on the
p.70
56