Projector Security Features; Password Security Types; Setting A Password - Epson CO-FH02 User Manual

Projector Security Features

You can secure your projector to deter theft or prevent unintended use by
setting up the following security features:
• Password security to prevent people who do not know the password from
using the projector, and prevent changes to the startup screen and other
settings.
This acts as an anti-theft function as the projector cannot be used even if it
is stolen, and you can limit who can use the projector.
• Security cabling to physically secure the projector in place.
g g Related Links
• "Password Security Types" p.52
• "Installing a Security Cable" p.54

Password Security Types

You can set up the following types of password security using one shared
password:
• Power On Protection prevents anyone from using the projector without
first entering a password. When plugging the power cord and turning on
the projector at first time, you must enter the correct password. This also
applies to Direct Power On and Auto Power On.
• User's Logo Protection prevents anyone from changing the custom screen
displayed when the projector turns on, when no signal is being input, or
when you use the A/V Mute feature. The custom screen discourages theft by
identifying the projector's owner.
g g Related Links
• "Setting a Password" p.52
• "Selecting Password Security Types"
• "Entering a Password to Use the Projector"

Setting a Password

To use password security, you must set a password.
p.53
p.54
The default password is set to "0000". Change this to your own
password.
a
a
Hold down the button on the remote control for about five
seconds.
You see the Password Protection setting menu.
b Select Password and press [Enter].
You see the prompt "Change the password?".
c Select Yes and press [Enter].
If you select No, the Password Protection setting menu is
displayed again.
a
d
Enter a four-digit password.
52