Controlling The Volume With The Volume Buttons - Epson CO-FH02 User Manual

Controlling the Volume with the Volume Buttons

The volume buttons control the projector's internal speaker system.
You must adjust the volume separately for each connected input source.
• To adjust the volume for connected audio/video system, set the
HDMI Link setting to On and the Audio Out Device setting to AV
System in the projector's Settings menu.
a
s Settings > Operation > HDMI Link > HDMI Link
s Settings > Operation > HDMI Link > Audio Out Device
a Turn on the projector and start a presentation.
b To lower or raise the volume, press the
remote control.
A volume gauge appears on the screen.
c To set the volume to a specific level for an input source, select Volume
in the projector's Settings menu.
Caution
Do not start a presentation at a high volume setting. Sudden loud noises may cause
hearing loss.
Always lower the volume before powering off, so that you can power on and then
gradually increase the volume.
g g Related Links
• "Projector Feature Settings - Settings Menu"
or buttons on the
p.60
43