SSET CE-IJ03 SK-0.5 Series Instructions

1-phase AC Current transducer
Istructions
CE - IJ03 - ***SK - 0.5
1 Overview
This device is a 1-element ac current isolation transducer. Using
the principle of electromagnetic isolation, can sampling the RMS
of the single-phase AC current, and isolate the output of a variety
of standard signals. Between the input and output to achieve
electrical isolation, the output signal and the input signal has a
complete linear relationship. The products are widely used in AC
current signal real-time monitoring, electricity, railways, industrial
monitoring and other fields.
Features:
Ø
High accuracy, low drift;
Ø
Pressure resistance of the products among the input, output
and power supply reach 2.5KV;
Ø
The use of standard rail mounting and screw mounting, easy
to install;
2 Case Style
Figure 1, BSK outline drawing
Figure 2, ESK outline drawing
3 Part Number
http://www.ce-transducer.com
sales@ce-transducer.com
3rd Floor, building 1, Zaimao industrial park, Baoji road, Bantian, Longgang district,
Shenzhen City, China Post code: 518049
4 Specifications
Test conditions: auxiliary power: +24 VDC,
room temperature: 25 ℃;
Input range: 0~30AAC（BSK case）;0~500AAC（ESK case）;
Output: 0~20mA, 4~20mA, 0~10V, 0~5V;
Power supply: 12VDC, 15VDC, 24VDC, 85~265VAC/DC;
Accuracy: 0.5;
Load capacity: load ≥ 2KΩ (voltage output) load ≤ 250Ω
(current output);
Temperature drift: ≤200ppm/℃;
Isolation voltage: ≥2500 V DC;
Response time: ≤200 mS;
:
Rated power consumption 1W;
Output ripple: ≤10mV;
Frequency range: 45~65Hz （ up to 5K, please specify when
ordering）;
Surge impact immunity:
Power port level ± 2KV (L-N/2Ω/integrated wave)
Analog I/O port level ±2KV (L-N/40Ω/integrated wave);
Impulse immunity: input / power port ± 2KV
analog I /O port ± 1KV;
Input overload capacity: 20 times the nominal value of the
measurement current (maximum 500A);
(Applying a repetition of five times a second, interval 300S);
Operating temperature: -10~ 60°C; humidity: ≤95% (no dew);
Storage temperature: -55 ~+65°C
5 Connections Diagram
(For reference only, the actual application to the product wiring
diagram shall prevail)
Figure 3 CE-IJ03-3*BSK/CE-IJ03-3*ESK/CE-IJ03-8*BSK
/CE-IJ03-8*ESK voltage output, CE-IJ03-4*BSK/CE-IJ03-4*ESK
/CE-IJ03-5*BSK/ CE-IJ03-5*ESK current output product wiring
diagram.
6 Mounting diagram
DIN35 rail mounting or screw mounting, the installation size
shown in Figure 4 (in mm).
humidity: ≤95% (no dew).
;