Storage And Installation; Stor Age And Oper Ation Environment; Tr Anspor Tation; Installation - NURIS LN 350 Operational Manual

3.STORAGE AND INSTALLATION

3.1. S T OR A GE A ND OPER A T I O N ENVI R ONM ENT

The machine should be stored in a closed and dry environment between
o
-30 C and +55

It should be kept upright and nothing should be put on it.

Operating temperature must be between -25
be operated in a dry environment.

Make sure that the machine can breathe easily while working .

Dirt and dust in the environment should be at minimum.
3.2. T R A NS POR T A T I ON

Always use the handles when moving the machine.

Never pull on cables, torch or hoses.

Before moving make sure that the machine is turned off and
disconnected from the grid.

Before transporting, remove all interconnections.

Gas cylinders and small parts must be transported separately from the
machine.

Chains and/or ropes to be used during transportation should be of equal
length, equal load distribution should be ensured and the machine
should be lifted in a balanced way.

The relevant regulations of the country of use, occupational safety and
accident prevention rules should be taken into account.

During transport, nobody should be in the dangerous area under the
machine.
3.3. I NS T A L L A T I ON

Put the welding machine in a place that you can easily access during
work.

The welding machine should not be close enough to adversely affect
the operation of the operator.

The machine must be placed in a way it can easily breathe from the air
inlets.

Make sure that the environment is not wet and too humid.
o
C.
5
08/2022 Rev. 1.1
o o
C and +40 C and it should