Settings - NURIS LN 350 Operational Manual

Pulse Setting
Water Motor
Material Thickness
4.3. S ET T I NGS
The Settings Tab provides detailed settings for the welding. Information about
these settings is given below.
Pulse, is a property that changes the welding
characteristic. Preferred when welding more
sensitive materials. Provides low heat input and less
spatter.
It is the symbol indicating whether the water motor
is on or off. The water motor should be turned off
when the air-cooled torch will be used, and should
be left on when not in use.
It is the symbol indicating the thickness of the
material to be welded.
Figure 6. Settings Tab
9
08/2022 Rev. 1.1