Remote Functions - Pyle PHSKR14 User Manual

REMOTE FUNCTIONS

NO. OPERATION
STOP
1
RESUME
2 STEP
FAST
3
FORWARD
REWIND
4
5 SLOW
6 REPEAT
7 A-B REPEAT
ZOOM
8
9 RETURN
PBC
10
(Playback
Control)
11 TITLE
DISC INSTRUCTION
Press STOP button to enter Stop mode. The TV screen will
display the starter logo. With certain disc types, such as DVD,
the player can resume playback from the point where it was
ALL
stopped. Press RESUME to resume playback from the location
FORMATS
where playback was stopped or from the beginning of the disc.
Please note: The player will go into SCREEN SAVE MODE if
there is no activity within one minute. Press any key to return
to NORMAL mode.
DVD
Press STEP continuously to single step forward to the next
SVCD
frame in the video. Press PLAY to resume normal playback.
VCD
Press FWD button to fast forward through the disc. Each
VCD
SVCD
time the FWD button is pressed, the fast forward motion
DVD
speed changes. Press PLAY to resume normal playback.
DVD
Press REV button to rewind through the disc. Each time
the REV button is pressed, the rewind motion speed
SVCD
changes. Press PLAY to resume normal playback.
VCD
By continuously pressing the "SLOW" button, the following
DVD
mode and information will appear on the screen - slow
SVCD
forward 1/2.1/8.1/16.1/32. Press the "PLAY" button at
VCD
anytime to return to normal playback mode.
To repeat a chapter, DVD title or the whole DVD content,
please see below:
DVD
- Press REPEAT once to repeat the contents of the chapter.
- Press it twice to repeat the contents of the title.
- Press it three times to repeat the contents of the DVD disc.
- Press it four times to cancel the repeat mode.
To repeat a specific section of the DVD content, please
follow the steps below:
ALL
Press the A-B key to set Point A as the starting point.
Press the key again to set Point B as the end point. The
part between A and B will be played repeatedly.
Press A-B key a third time to cancel this function.
DVD Press the "ZOOM" button continuously to increase the size
of the picture by X1, X2 or X4. Use the "UP", "DOWN, "LEFT"
SVCD
and "RIGHT" buttons to move the picture.
SVCD
Press this key to return to the main menu.
VCD2.0
The PBC allows the user to play Video CDs interactively.
DVD
If PBC is ON, the user can use the digit buttons to
SVCD
select a track but only from the menu. If PBC is OFF,
VCD2.0
the user can select the track directly.
DVD Press this key to plav the selected menu.
www.PyleUSA.com
9