Table of Contents
Advertisement
⑨ Click Validate Sequence, then click Play. At this point, it can be displayed
according to the set mode. If it is in external trigger display mode, it needs to give
external trigger signal to display normally.
4.3.5 Save picture settings
The above setting method is not saved in Flash after power off and restart. In
order to be able to follow the set display every time the power is turned off and
restarted, you need to continue the following operations:
Save the display mode, click Save Solution, name it and save it as an .ini file.
1
② Click Image/Firmware, click Firmware Bulid, click Select .ini File, and select
18
Advertisement
Table of Contents
