Image Input And Control - BOPIXEL OPR405 Series Operating Manual

4.3 Image Input and Control

Open the program interface is as follows：
When the DLP module is connected to the power supply, the USB interface of the
DLP is connected to the computer, the connected of the control interface turns
green.
Because the flash of the DLP control chip is only 48bit, and only 24bit images
can be uploaded when uploading. Upload a single image, the image must be 24bit. If
you want to upload four pictures according to our application, you need to combine
three 8bit black and white pictures into one 24bit, and then set another black and
white picture to 24bit for upload. Only when 48bit is full can the maximum speed of
switching pictures be guaranteed.In the following, we will upload four 8bit images as
an example according to the application scenario.
Click the button to connect.
9