Table of Contents
Advertisement
ACK
At the occurrence of an event (alarm or fault), the buzzer of the central unit will sound
and the display will pass to the visualization of the page Active Events where there will
be the indication of the sensor in Alarm and/or Fault. To silence the central unit buzzer,
turn the key to the central position (ACK) and press the ACK key, the central unit buzzer
will stop sounding and an X will appear on the event line on the right.
RESET
Turning the key to the left
(already with the indication "X") will perform the Reset of the event and the event itself
will disappear from the ACTIVE EVENTS list.
NOTE: in case the event you are trying to reset is still existing (for example a gas
detector still in Alarm), after the Reset procedure, the existing event will still appear
making it necessary to perform the acknowledgement operation (ACK) one more time.
NFG-8
NFG-8_manu-inst_ITA
and pressing RST on a previously recognized event
Installation and Operation
Manual
Doc. M-040.1-NFG8-EN
Rev A.3
PAGE - 11
NOTIFIER ITALY
Advertisement
Table of Contents
