Adjusting The Speaker Volume And Treble Controls - JBL DSC 500 Owner's Manual

O T H E R F U N C T I O N S ( C O N T I N U E D )
encoded discs. Other compressed
audio formats used for Internet
audio downloads will not play on the
JBL DSC 500 DVD.
• Due to the differences in various
versions of the MP3 format, and the
many differences between the CD-R
machines used to record MP3 discs
on a computer, it is possible that
some MP3 discs may not play on the
JBL DSC 500 DVD, even though they
will work on a computer. This is
normal and does not indicate a fault
in the unit.
• When a multisession disc with both
standard CD audio and MP3 content
is in use, the JBL DSC 500 DVD will
play only the CD audio sections of
the disc.
• When an MP3 disc with multiple
directories is played, you can select
the desired directory and see its
title list as described above. Return
to the directory list menu from the
title list by pressing RETURN (in stop
mode only).
• Programming tracks is not possible
with MP3 discs.
Adjusting The Individual
Speaker Volume
(without Test Tone) And
Treble Controls
Note:
All bass sounds are directed to the
subwoofer only. You cannot adjust
the bass level of the 5 compact
satellite speakers, only that of the
Subwoofer. These 5 satellite
speakers are designed to reproduce
the mid and high frequency (treble)
sounds only.
• To increase or decrease the treble
level of the satellite speakers, press
the ADJUST button on the remote
control. "TRE : 00 db" will appear on
the front panel display.
• Immediately press the VOLUME + or
- buttons to increase or decrease
the treble level of all 5 satellites
simultaneously. The adjustment
range is plus or minus 10db in 2db
steps.
MUTE
VOLUME + AND -
ADJUST
Note:
You must make the adjustment while
the treble level appears in the
display. If the treble level indicator
disappears, the setting will not be
changed. When you change the
setting, the new setting becomes the
default setting until you change it
again.
• To raise or lower the master volume
press the VOLUME + or - button on
the remote control after the treble
level indicator has disappeared. The
level of all 6 speakers will be
increased or decreased together.
• To raise or lower the volume of one
or more speakers individually, insert
a DVD movie disc with a Dolby
Digital or DTS 5.1 channel
soundtrack and begin playback.
Then press the ADJUST button on
the remote control to select the 6
speakers in the following sequence:
TREBLE LEVEL © FRONT LEFT ©
CENTER © FRONT RIGHT ©
SURROUND RIGHT © SURROUND
LEFT © SUBWOOFER © MASTER
VOLUME © TREBLE LEVEL © etc
• When the desired speaker level
appears on the TV screen and front
panel display, immediately press the
VOLUME + or - buttons to raise or
lower the level of that particular
speaker. The adjustment range is
plus or minus 10db in 1db steps. You
must adjust the setting while the
speaker level appears on the
screen. If the speaker level indi-
cator disappears, the setting will not
be changed.
Note:
If the video disc you are playing has a
stereo soundtrack or you are playing
an audio CD, you will only see the
level indicators for the left and right
front speakers and the subwoofer.
You will not be able to adjust the
volume level of the center speaker or
the two rear speakers.
Remember that the rear speakers are
designed to operate only when there
is action, ambience or effects behind
you. If you adjust the level of the rear
speakers incorrectly so that you
constantly hear sound behind you,
you will not get the proper surround
effect.
35