Table of Contents
Advertisement
G E N E R A L S E T U P
Selecting the On Screen
Display (OSD) Language
The first step in making any settings
is to select your preferred language
for the On Screen Display menus.
We have preset the initial default On
Screen Display (OSD) Language to
English. If English is your preferred
language, no adjustment is necessary
and you can skip to the next section.
To change the On Screen Display
(OSD) Language to German, Italian,
French or Spanish, follow these three
steps:
OK
, , ,
setup
1. Press SETUP to enter SETUP
MENU. Use (
) to select
GENERAL SETUP, and then press
OK.
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
2. Select OSD LANG using (
then press
to go to the right
option list. Select the desired
language using (
), then press
OK to confirm your selection.
TV DISPLAY
TV TYPE
ANGLE MARK
VIDEO OUT
ENGLISH
SPANISH
FRENCH
ITALIAN
GE RMAN
3. Press SETUP again to exit SETUP
MENU.
Notes:
• This setting will automatically select
the languages for the audio track,
subtitles and disc menus appro-
priately (see pages 28, 29), if available
on the disc.
• If the disc you are viewing does not
support the On Screen Display (OSD)
language you selected, the player will
automatically default to the language
specified on the disc itself.
Screen Saver Setting
(SCR Saver)
Path: Main Page © General Page ©
SCR Saver
TV DISPLAY
TV TYPE
ANGLE MARK
VIDEO OUT
OSD LANG
ON
OFF
Turns the screen saver option on or
off (default is on).
If you turn the screen saver on, the
screen saver image appears when
you leave the system in pause or stop
mode for more than 1 minute. The
screen saver is useful to prevent your
display from becoming damaged.
• ON: Turns the screen saver on.
• OFF: Turns the screen saver off.
),
TV Display Setting
Path: Main Page © General Page ©
TV Display
N OR M A L / PS
N OR M A L / LB
TV TYPE
16:9
ANGLE MARK
VIDEO OUT
OSD LANG
SCR SAVER
Selects the aspect ratio of the TV set
to be connected.
• NORMAL/PS (4:3 Pan & Scan
mode):Used when you connect a
normal TV to the system. Displays a
wide picture on the whole TV
screen with a portion (right and left
sides of the picture) automatically
cut off.
• NORMAL/LB (4:3 Letterbox mode):
Used when you connect a normal
TV to the system. Displays a wide
picture with bands displayed on the
upper and lower portions of the
screen.
• 16:9 (Widescreen mode): Used
when you connect a widescreen TV
to the system or a normal 4:3 TV,
that can be turned to 16:9 mode.
NORMAL/PS
NORMAL/LB
16 : 9
Notes:
• Some widescreen discs that do not
permit Pan & Scan mode playback
are automatically played in Letter-
box mode.
25
Hide quick links:
Advertisement
Table of Contents
