Advertisement
Quick Links
Advertisement
Related Manuals for Jacobsen 600 Series
Summary of Contents for Jacobsen 600 Series
- Page 1 Jacobsen 600 Series ROPS Parts List & Mounting Instructions Jodale • Perry Printed: 2003/02...
- Page 2 Jacobsen 600 Series Mounting Instructions Standard Parts List Description Photo L&R Rear Mounting Brackets L&R Front Mounting Brackets L&R Front Bracket Support Seat Prop Rod Cab Lift Brackets (1” Tube) 3/8” Black Snap Caps Mower Stabilizer Bracket NOTE: All references to left and right are taken from the operator’s point of view when he/she is...
- Page 3 Jacobsen 600 Series Mounting Instructions Standard Bolts List Description Isolator, Rubber, 9/16” x 3” Washer, Rubber, 9/16” x 2 ½” Washer, Steel, 9/16” x 2 ½”, YD Bolt, Hex, ½” x 3”, Gr. 8, YD Washer, Lock, ½” Washer, Flat, 1/2”...
- Page 4 Jacobsen 600 Series Mounting Instructions NOTE: Use the following torque drill two 9/16” holes through the top of specifications for all hardware: ½” the platform. Use the ½” x 1” hex bolts, hardware 73 ft-lbs, 3/8” hardware 42 flat washers, lock washers, and hex nuts ft-lbs, 5/8”...
- Page 5 Jacobsen 600 Series Mounting Instructions outside. Loosely fasten the bracket to cab is done, drop the fasteners into place the chassis with ½” x 1 ½” hex bolts, lock and loosely fasten as shown in Figure 5. washers, and hex nuts provided. See Figure 5 Figure 3.
- Page 6 Jacobsen 600 Series Mounting Instructions provided, and attach bracket to mount. See Figure 6. 10. Take the seat belt kit, and the 7/16” x 2” hex bolts, lock washers, and 7/16” hex nuts. Locate the holes in the lower member at the back of the cab near the bottom of the tubing.
Need help?
Do you have a question about the 600 Series and is the answer not in the manual?
Questions and answers