Final Checklist - Fisher & Paykel WD60S Installation Instructions Manual

FINAL CHECKLIST

11
TO BE COMPLETED BY THE INSTALLER
Make sure the warming drawer is level and securely fitted to the cabinetry.
Make sure any internal packaging has been removed from the drawer.
Make sure that the isolating switch is accessible by the customer.
Make sure the anti-tip bracket has been fitted correctly if it is required.
If installing an oven directly ontop of the warming drawer, make sure the
supplied oven support brackets have been fitted to the warming drawer.
TEST OPERATION:
Open the drawer and press the
The on/off halo and temperature setting 2 (
Shut the drawer.
After 5-10 minutes open the drawer. The internal surfaces of the drawer
should feel slightly warmed.
Press the button to turn the warming drawer off and shut the drawer.
button to turn the warming drawer on.
) halo should glow red.
www.fi sherpaykel.com
Installer' s name:
Installer' s signature:
Installation company:
Date of installation:
LEAVE THESE INSTRUCTIONS WITH THE CUSTOMER
Important!
SAVE THESE INSTRUCTIONS
The models shown in this document may not be available in all markets and are subject to change
at any time. For current details about model and specification availability in your country, please
visit our local website listed at the end of this document or contact your local Fisher & Paykel
dealer.