Sony LinkBuds S YY2950 Reference Manual page 69

Click [LinkBuds S] on the [Bluetooth] screen while pressing the computer Control button and select [Connect]
2.
from the pop up menu.
The connection is established. You will hear a notification sound from both headset units (or from the headset
unit you are wearing) at the same time.
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the computer.
Note
If the music playback sound quality is poor, check that the A2DP function which supports music playback connections is enabled
in the computer settings. For more details, refer to the operating instructions supplied with the computer.
If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply
turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
If you cannot connect your computer to the headset, delete the headset pairing information on your computer and perform the
pairing again. As for the operations on your computer, refer to the operating instructions supplied with the computer.
Related Topic
Wearing the headset
Using only one unit of the headset
How to make a wireless connection to Bluetooth devices
Pairing and connecting with a computer (Mac)
Listening to music from a device via Bluetooth connection
66