Sony LinkBuds S YY2950 Reference Manual page 27

Help Guide
Wireless Noise Canceling Stereo Headset
LinkBuds S
Charging
The headset and the charging case contain built-in lithium-ion rechargeable batteries. Use the supplied USB Type-C
cable to charge the headset before use.
Set the headset into the charging case.
1
Put the left unit of the headset (the unit with the tactile dot) back into the left hole of the charging case, and put the
right unit of the headset back into the right hole of the charging case. Each unit of the headset will be set to the
correct position in the charging case by the built-in magnet.
When the remaining battery charge of the charging case is sufficient, the indicator (orange or green) on the
charging case lights up for about 3 seconds.
The charging starts on the headset. Close the lid of the charging case.
Connect the charging case to an AC outlet.
2
Use the supplied USB Type-C cable and a commercially available USB AC adaptor.
A: USB AC adaptor
Charging starts on the headset and charging case. The indicator (orange) on the charging case lights up.
After charging is complete, the indicator on the charging case turns off.
Remove the USB Type-C cable.
About the charging time
The required time for fully charging the headset and the charging case is about 3 hours (*).
24