Sony LinkBuds S YY2950 Reference Manual page 46

If Passkey (*) input is required, input "0000".
The headset and iPhone are paired and connected with each other.
When the headset is placed in the charging case, the indicator (blue) on the charging case flashes slowly for about
5 seconds.
When you are wearing the headset, you will hear a notification sound from both headset units at the same time.
If they are not connected, see
If [LinkBuds S] does not appear on the display of the iPhone, try again from the beginning of step
* A Passkey may be called "Passcode", "PIN code", "PIN number", or "Password".
About the instruction manual video
Watch the video to find out how to perform the pairing for the first time.
https://rd1.sony.net/help/mdr/mov0044/h_zz/
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with your iPhone.
To delete all Bluetooth pairing information, see
Note
If pairing is not established within 5 minutes, pairing mode is canceled. In this case, set the headset into the charging case, and
start the operation again from step
Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
When a 9th device is paired.
The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration
information of the paired device with the oldest connection date is overwritten with the information for the new device.
When the pairing information for the headset has been deleted from the Bluetooth device.
When the headset is initialized.
All of the pairing information is deleted. In this case, delete the pairing information for the headset from the connected device
and then pair them again.
The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.
Related Topic
Wearing the headset
How to make a wireless connection to Bluetooth devices
Connecting to a paired iPhone
Listening to music from a device via Bluetooth connection
Disconnecting Bluetooth connection (after use)
Initializing the headset to restore factory settings
"Connecting to a paired iPhone
"Initializing the headset to restore factory
.
5-035-792-11(1) Copyright 2022 Sony Corporation
43
".
settings".
.