Sony LinkBuds S YY2950 Reference Manual page 68

Help Guide
Wireless Noise Canceling Stereo Headset
LinkBuds S
Connecting to a paired computer (Mac)
Compatible OS
macOS (version 10.15 or later)
Before starting the operation, make sure of the following:
Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not
know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to
the operating instructions supplied with the computer.
Set the computer speaker to the ON mode.
If the computer speaker is set to the
Computer speaker in the ON mode
Wake the computer up if the computer is in standby (sleep) or hibernation mode.
1
Remove the headset from the charging case.
2
The headset turns on automatically.
Put the headset units into both ears.
3
When the headset has automatically connected to the last connected device, you will hear a notification sound from
both headset units (or from the headset unit you are wearing) at the same time.
Check the connection status on the computer. If it is not connected, proceed to step
Select the headset using the computer.
4
1. Select [ (System Preferences)] - [Bluetooth] from the Dock at the bottom of the screen.
"OFF" mode, no sound is heard from the headset.
65
.