URBAN OUTFITTERS MABELLE Assembly Instructions

MABELLE MIRROR

Assembly Instructions

TOOLS REQUIRED BUT NOT INCLUDED:

MANNER OR CORDLESS SCREW DRIVER

Do not throw away packing materials and carton until after assembly.

Assemble all parts on a clean smooth surface

Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.

Adjust levelers so that the furniture sits flat on uneven floors.

Blot spills do not rub, with a clean white cloth.

Do not use harsh chemicals.

Before cleaning any part test a small spot in a hidden area.

You may need to re-tighten all bolts after initial use.

(A) Mirror Frames

Quantity: 1pc

(1) Bolt

M6 x 40mm

Quantity: 8pcs

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.

Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.

(B) Support rail

Quantity: 2pcs

(2) Allen key

Quantity: 1pc

Page 1 of 3

Table of Contents

Do you have a question about the MABELLE and is the answer not in the manual?

Page 1 Quantity: 1pc M6 x 40mm Quantity: 8pcs EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 1 of 3 Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2 (A) as shown. Insert Bolts (1) and tighten with supplied hex key (2). EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 2 of 3...
Page 3 Insert Bolts (1) and tighten with supplied hex key (2). EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 3 of 3...