Summary of Contents for Mocka Phoebe Entertainment Unit
Page 1
Wall Strap bracket Hardware Supplied Phillips & Flathead screwdrivers required. For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 2
Attach panel [2] to assembled frame as shown and secure with 6 x medium screws (B). Tighten with a screwdriver. (B), 8 x short screws (C) and 4 x brackets (E). Tighten with a screw driver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 3
Attach panels [5] to panels [3] together as shown and secure with 4 x bolts (A) and 8 x locking nuts (A). Tighten with a screwdriver. bolts (A) and 4 x locking nuts (A). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 4
Attach panels [5] to assembled frame and secure with 4 x long screw bolts (A) and 4 x locking nuts (A). Tighten with a screwdriver. (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 5
25mm screws (I). Fasten to wall using 2 x wall anchors (F) and 2 x 14mm screws (H). Tighten with a screwdriver. Ensure unit is bal anced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Phoebe Entertainment Unit and is the answer not in the manual?
Questions and answers