Flexible Call Forwarding; Master Hunt Groups - Iwatsu ADIX APS Quick Reference Manual

Flexible Call Forwarding

You can set your phone to forward calls to another
extension or to an external telephone number. To
forward calls externally, you must first register the
external telephone number to a personal speed dial
code (90-99). (See the Speed Dial feature in the Digital
Telephone Station User Quick Reference Guide.)
You can also separate Call Forward destinations for
ICM calls and CO incoming calls. For example, you
could forward all ICM calls to your cellular telephone
and all CO calls to your Voice Mail.
Set Forward Destination
Lift the receiver (handset) or press [SPKR]
Press [FWD]
Enter the Call Type you wish to forward
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
Enter the Flexible Call Forward Mode
1 = All calls to another extension or hunt group
2 = Busy/No Answer calls to another extension or
hunt group
3 = No Answer calls to another extension or hunt
group
4 = All Calls forward to an external number (using
Personal Speed Dial Codes 90-99)
Do one of the following
If you chose Mode 1,2, or 3, enter the extension or
hunt group number
If you chose Mode 4, enter the Personal Speed
Dial Code (90-99)
Forward Cancel
Lift the receiver (handset)
Press [FWD]
Press
Enter the Call Type number you wish to cancel
1 = Cancel Forwarding of All calls (CO/Intercom)
2 = Cancel Forwarding of CO calls only
3 = Cancel Forwarding of Intercom calls only
Set Active/Inactive
Press [FWD]
Enter the Call Type you wish to make
Active/Inactive
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
11
Set Follow Me Destination
Lift the receiver (handset)
Press [FWD] + [FWD]
Enter the Call Type you wish to forward
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
Enter the extension number of the originating
forwarding station
Hold/Quick Forward Operation
If your phone is equipped with this feature, pressing
[HOLD/DND] will automatically forward all incoming
calls to you fixed call forward destination.

Master Hunt Groups

ADIX allows extensions to be programmed into Hunt
Groups. Each Hunt Group is assigned code and when
dialed the system searches for the first idle extension.
To Call a Hunt Group
Lift the receiver
Wait for the dial tone
Dial Hunt Group access code
or
Press [HUNT] if assigned as a Multipurpose button
Message Waiting
To Leave a Message
When the extension you are calling is busy or does
not answer
Do not hang up
Press the [MESSAGE] button and
After you hear a confirmation tone, hang up
The [MESSAGE] button lamp will stay lit at the called
extension.
To Cancel Message Waiting
If you want to cancel a message you left at an
extension
Lift the receiver
Press the [MESSAGE] button and
extension number
After you hear a confirmation tone, hang up
The [MESSAGE] button lamp will go out at the
extension.
Note: This feature is not available if the [MBOX] key is used for voicemail
access.
, then dial the
12