Changing Oven Settings; Clock; Oven Light; Timer On/Off - LG PrintProof LSDL6336 Series Owner's Manual

us_main.book.book Page 31 Thursday, January 27, 2022 1:33 PM
NOTE
• Flashing Clock
If the colon in the clock display flashes, press Clock and reset the time, or press any key to stop the
flashing.
• Press any button on the control panel to activate the display.
• Setting the Time, Timer and Temperature
If you enter one digit of a number incorrectly, enter the entire number again to correct it. For example, if
you press 1, 0, 3 and 1 to set the clock for 10:30, press 1, 0, 3 and 0 to enter the correct time.

Changing Oven Settings

Clock

The clock must be set to the correct time of day in
order for the automatic oven timing functions to
work properly.
1
Press Clock
2
Press the numbers to enter the time. For
example, to set the clock for 10:30, press the
numbers: 1, 0, 3 and 0.
3
Press START.
NOTE
• The time of day cannot be changed during a
timed baking or self-clean cycle.
• To check the time of day when the display is
showing other information, press Clock.
• If no other buttons are pressed within 25
seconds of pressing Clock, the display reverts to
the original setting.
• If the display time is blinking, there may have
been a power failure. Reset the time.

Oven Light

The interior oven light automatically turns on
when the door is opened.
• Press Light to manually turn the oven light on.
NOTE
• The oven light cannot be turned on if the Self
Clean function is active.
• The oven light turns off automatically after 90
seconds.

Timer On/Off

The Timer serves as an extra timer in the kitchen
that beeps when the set time has run out. It does
not start or stop cooking.
The Timer feature can be used during any of the
other oven control functions.
For example, to set 5 minutes:
1
Press Timer On/Off once.
0:00 appears and Timer flashes in the display.
2
Press 5.
0:05 appears in the display.
3
Press Timer On/Off to start the Timer. The
remaining time countdown appears in the
display.
NOTE
• If Timer On/Off is not pressed, the timer returns
to the time of day.
4
When the set time runs out, End shows in the
display. The indicator tones sound every 15
seconds until Timer On/Off is pressed.
NOTE
• If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
• Press Timer On/Off twice to set the time in
minutes and seconds.
• Press Timer On/Off once to set the time in
hours and minutes.
OPERATION 31