Denon PMA-1600NE Service Manual page 36

DISASSEMBLY
Flowchart
• Remove each part following the flow below.
• Reassemble the removed parts in the reverse order.
• Read "SAFETY PRECAUTIONS" before reassembling the removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the work. Failure to shape the wires correctly may cause problems such as noise.
• See "EXPLODED VIEW"
FRONT PANEL ASSY
DISASSEMBLY
1. FRONT PANEL ASSY
and "EXPLODED VIEW"
P.SW PCB
Ref. No. of EXPLODED VIEW : B 1-3
TACT SW PCB
Ref. No. of EXPLODED VIEW : B 1-5
HP PCB
Ref. No. of EXPLODED VIEW : B 1-6
P.LED PCB
Ref. No. of EXPLODED VIEW : B 1-7
FLD PCB
Ref. No. of EXPLODED VIEW : B 1-8
SELECTOR PCB
Ref. No. of EXPLODED VIEW : B 1-9
VOLUME PCB
Ref. No. of EXPLODED VIEW : B 2-2
TONE PCB
Ref. No. of EXPLODED VIEW : B 2-3
TOP COVER
AMP ASSY
DISASSEMBLY
2. AMP ASSY
and "EXPLODED VIEW"
P.AMP PCB
Ref. No. of EXPLODED VIEW : B 1-1
DIGITAL ASSY
DISASSEMBLY
3. DIGITAL ASSY
and "EXPLODED VIEW"
DIGITAL PCB
Ref. No. of EXPLODED VIEW : B 3
INPUT PCB
DISASSEMBLY
4. INPUT PCB
and "EXPLODED VIEW"
INPUT PCB
Ref. No. of EXPLODED VIEW : B 2-1
36
SUPPLY PCB
DISASSEMBLY
5. SUPPLY PCB
and "EXPLODED VIEW"
SUPPLY PCB
Ref. No. of EXPLODED VIEW : B 1-4
AC PCB
DISASSEMBLY
6. AC PCB
and "EXPLODED VIEW"
AC PCB
Ref. No. of EXPLODED VIEW : B 1-2
JOINT PCB
Ref. No. of EXPLODED VIEW : B 2-4
TRANS
DISASSEMBLY
7. TRANS
and "EXPLODED VIEW"
POWER TRANS
Ref. No. of EXPLODED VIEW : M 43
POWER TRANS
Ref. No. of EXPLODED VIEW : M 44