RC-5+ Temperature Data Logger
(Multi Use) User Manual
Download and Install Software
1. Visit www.elitechlog.com/softwares. Select and download
the software.
2. Double click to open the zip file. Follow the prompts to
install it.
3. When the installation is complete, open the software.
I f necessary, disable the firewall or close the antivirus software.
Configure the Logger
1. Remove the cover from the data logger and connect the
logger to a computer USB port. The software will read
the logger automatically. Once connected, it will connect
to the "Summary" page which shows Device and Alarm
information.
2. To adjust parameters for setup, click on the "Parameters"
Tab. On this page, you can set up all required logging
parameters.
•
Logging interval period - set period. Will automatically
set Logging Duration
•
Set a Start Delay time to start recording
•
Set Start Mode - Immediate Start, Press button or
Timed Start
•
Select Temperature Unit (C or F).
•
Set Logger Display Time - time logger screen will hold
display information
•
Logging Duration - select to manually select time to
log temperatures (will auto adjust logging interval)
•
Set Password - set password if required
•
Stop Mode - select press button to stop recording.
Deselect to use software to stop recording
•
Time Zone - select UTC Time Zone
•
Trip Number - enter a trip number as required
•
Probe Type - select internal or external for device
solutions@shockwatch.com.au
1300 074 625
shockwatch.com.au
May 2022