Table of Contents
Advertisement
Manual
© Danfoss A/S (AC-MCI/sw), 2014-03
EIM 316/336 interface application for setup and configuration of MMIMyK
6.8 Service functions
Two service functions are available, resetting to
factory default settings, and setting factory
default settings.
The User2Factory function will copy the current
settings, into the eeprom and save them as
6.9 Service info screens
The service info screens display different
information about the application. Software info
displays the name, software version and date of
the application. It also displays the bios version
number and date of the MyK itself.
DKRCC.PS.RQ0.C2.02 / 520H8422
factory defaults. This means that if a factory reset
is performed, these are the settings that will be
used.
The Factory2User function will overwrite the
current settings, with settings that are stored in
the eeprom.
The product info screen displays the software
version number and order number of the
connected EIM.
9
Advertisement
Table of Contents
