Invicta 360 Instruction Manual And Warranty page 17

CHRONO GRAPHS
Setting the Time
1. Pull out the crown to position 2.
To set the time to the exact second, it must be pulled out when the second
hand is in position 0. The watch stops.
2. Turn the crown until you reach the correct time.
3. Push the crown back into position 0.
To set the time to the exact second, it must be pushed back into position
0 at the exact second.
30
1. Pull out the crown to position 1.
The watch continues to run.
2. Turn the crown until you reach the correct date.
3. Push the crown back into position 0.
To set the time to the exact second, it must be pushed back into
position 0 at the exact second.
! PLEASE NOTE . If you are setting the date between 9pm and 12pm, the
date must be set to the following day.
CHRONO GRAPHS
Setting the Date . Quick Mode
31