Invicta 360 Instruction Manual And Warranty page 11

WATCHES WITH ALARM
Setting the Reference Time
Parallel to the current time, the reference time runs in the background: the
alarm time refers itself to this reference time. Thus, resetting the time also
requires the identical correction of the reference time.If the reference time
is not synchronized with the current time, this results in the alarm signal
being emitted at a different time than the set alarm time.
1. Pull out the crown to position 2. The second hand stops. The display
changes from alarm time to reference time. To set your watch to the
exact second, the crown must be pulled out when the second hand is
in position 0.
18
2. Press the push-button for at least 2 seconds. Until the small minute
hand jumps forward one minute and setting mode is activated.
Short pressing: Less than 1 second:
The reference time is moved forward by the minute.
Medium pressing: 1-2 seconds:
The reference time is moved forward by the hour.
Long pressing: Longer than 2 seconds:
The reference time is moved forward until the push-button is released.
3. Push the crown back into position 0. To set it to the exact second,
the crown must be pushed back into position 0 at the exact second.
The display changes from reference time to alarm time. A signal indicates
that the alarm is switched off.
WATCHES WITH ALARM
Setting the Reference Time
19